PROXIMITY SENSOR CJF25-07PA Rectangle Type PNP-NO DC10-30V 3 WIRES

PROXIMITY SENSOR CJF25-07PA Rectangle Type PNP-NO DC10-30V 3 WIRES

A proximity sensor is a sensor able to detect the presence of nearby objects without any physical contact. A proximity
sensor often emits an electromagnetic field or a beam of electromagnetic radiation (infrared, for instance), and looks for
changes in the field or return signal. The object being sensed is often referred to as the proximity sensor’s target.
Different proximity sensor targets demand different sensors. For example, a capacitive or photoelectric sensor might be
suitable for a plastic target; an inductive proximity sensor always requires a metal target.
The maximum distance that this sensor can detect is defined “nominal range”. Some sensors have adjustments of the
nominal range or means to report a graduated detection distance.

• Sensing distance 7mm
• Hysteresis Max. 10% of sensing distance
• Standard sensing target 30×30×1mm ( Iron)
• Sensing distance 0~5.5mm
• Power supply (Operating voltage) 12-24VDC (10-30VDC)
• Leakage current Max.10mA
• Response frequency 700Hz
• Residual voltage Max. 1.0V
• Affection by Temp. Max. ±10% for sensing distance at ambient temperature 20℃
• Control output 200mA
• Insulation resistance Min. 5ϬMΩ(at 5ϬϬVDC mugger)
• Dielectric strength 1500VAC 50/60Hz for 1minute
• Vibration 1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
• Shock 500m/s2(approx. 50G) X, Y, Z directions for 3 times
• Indicator Operation indicator(red LED)
• Ambient temperature -25~+70℃( No icing)
• Storage temperature -30~+80℃( No icing)
• Ambient humidity 35~95%RH ( No condensation)
• Protection circuit Surge protection circuit, Overcurrent protection circuit
• Cable Φ4.8, 3P, 1.5m AWG24, Core diameter: 0.1mm, Number of cores: ϮϬ, Insulator diaŵeter: φϭ.Ϯ5
• Material Case: Heat-resistant ABS, Standard cable(Grey):
• Polyvinyl chloride(PVC)