Source current: 35 mA max.
Residual voltage: 0.4 V max.(at source current of 35 mA)
It is easy to adjust the position of phase Z with the origin indication function. The following illustration shows the relationship between phase Z and its origin. Set cut face D to the phase Z origin as shown in the illustration.
• Do not extend the length of the cable to more than 2 m. If the cable must be more than 2 m, use a Model with a Line-driver Output (max. length: 100 m).
● Wiring
Spurious pulses may be generated when power is turned ON and OFF. Wait at least 0.1 s after turning ON the power to the Encoder before using the connected device, and stop using the connected device at least 0.1 s before turning OFF the power to the Encoder. Also, turn ON the power to the load only after turning ON the power to the Encoder.
Reviews
There are no reviews yet.